inquiry

Leave Your Message

(Remote Control) Airwoods Eco-Vent Single Room ERV 50-64CMH/30-38CFM

● Consume Little Energy

● Silence Operation

● Prevent Excessive Indoor Humidity and Mould Build-up

● High Efficient Ceramic Energy Regenerator

● Outer Hood Can Prevent Rain Draining Back and Birds Nesting

    {"prod-data2":{"prod-title":"<p>Energy regenerator</p>","Honeycomb Regenerator":"https://ecdn6.globalso.com/upload/p/2082/image_other/2025-09/honeycomb-regenerator-1.jpg"," Ball Regenerator":"https://ecdn6.globalso.com/upload/p/2082/image_other/2025-09/ball-regenerator-1.jpg"},"prod-data5":{"prod-title":"<p>Suitable Wall Thickness</p>","230-400mm":"https://ecdn6.globalso.com/upload/p/2082/image_product/2025-02/280-470mm.jpg","335-600mm":"https://ecdn6.globalso.com/upload/p/2082/image_product/2025-02/280-470mm.jpg"}}
    Contact us Download

    xianlim4Key Features

    Ceramic Energy Regenerator

    The high-tech ceramic energy accumulator with regeneration efficiency up to 97 % ensures extract air heat recovery for warming of supply air flow. Due to the cellular structure the unique regenerator has a large air contact surface and high heat-conducting and heat-accumulating properties.
    The ceramic regenerator is treated with an antibacterial composition which prevents bacteria growth inside of the energy regenerator. The antibacterial properties last for 10 years.

    Air Filters

    The two integrated air filters with total filtration rate G3 provide supply and extract air filtration. The filters prevent ingress of dust and insects into the supply air and contamination of the ventilator parts. The filters also have antibacterial treatment.
    The filter cleaning is done with a vacuum cleaner or water flushing. The antibacterial solution is not removed. F8 filter is available as a specially ordered accessory, but when installed, it reduces the air flow down to 40 m 3 /h.

    Reversible Dc-Fan

    The reversible axial fan with a DC motor and power supply voltage of 12 V serves for air supply and exhaust. Due to the applied DC technology the fan is featured with low power consumption. The fan motor has integrated thermal overheating protection and ball bearings for long service life.
    Products Structure

    Operation Modes 

    Ventilation Mode: The ventilator runs in the air extract or air supply mode with a set speed. In case of synchronous operation of two connected ventilators one unit operates in the supply mode and the other one in the extract mode.
    Regeneration Mode: The ventilator runs in two cycles,65 seconds each, to provide heat and moisture regeneration.
    Operation Modes

    Working Principle

    The reversible operation of the ventilator enables energy regeneration and consists of two cycles:
    CYCLE I
    The polluted warm air is extracted from the room and while passing the ceramic energy regenerator, the recuperator will absorb the heat and moisture. In 65 seconds, as the energy regenerator gets warmed, the ventilator automatically switches to the supply mode.
    CYCLE II
    The fresh, but cold outdoor air flows through the heat regenerator and absorbs the accumulated heat and moisture so that the temperature of supply air flow will close to the room temperature. In 65 seconds, when the energy regenerator gets cold, the ventilator switches to the air extract mode. The cycle starts from the beginning.
    Working Principle

    Applications

    The ventilator is designed to ensure continuous mechanical air exchange in houses, offices, hotels, cafes, conference halls and other residential and public premises. The ventilator is equipped with a ceramic regenerator that enables supply of fresh filtered air heated by means of extract air heat regeneration. The ventilator is designed for through-the-wall mounting and is rated for non-stop operation. Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous materials, coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances, dust, pathogenic germs).

    Certification

    Certification

    Technical Parameters

    Voltage (V) 220-240
    Frequency (Hz) 50/60
    Input Power (W) 11
    Current (A) 0.08
    RPM 2000 (max)
    Airflow (m3/h) L/M/H 20/42/64
    Noise dB(A) 36.7
    Regeneration efficiency (%) ≤ 92
    Ingress protection rating IP24
    Air duct (mm) φ157
    SEC class A
    Mounting WALL MOUNTING
    Weight(kg) 6

    Dimensions

    Dimensions

    DocumentationDocumentation

    Download_file
    Single Room Heat Recovery Ventilator Brochure
    Download_file
    Airwoods General Product Catalogue

    Name (Please enter your name)

    Phone/ WhatsApp/ Wechat (For urgent contact)

    Country

    Message (Please enter your message)

    reset